Vivotek PT3123 User Manual download pdf (Page 35)

- 34 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

address is 192.168.0.100 from 80 to 8080, the User must type in the web browser

“http://192.168.0.100:8080” instead of “http://192.168.0.100”.

Streaming

“Control channel port” This can be something other than the default port 5001 in

order to work with the port opened by the firewall.

“Audio channel port” This can be something other than the default port 5002 in order

to work with the port opened by the firewall.

“Video channel port” This can be something other than the default port 5003 in order

to work with the port opened by the firewall.

“Improve audio quality in low bandwidth environment” If the Network Camera

seems to work in a low bandwidth network environment, the User can use this option

to see if audio quality can be improved by sacrificing some real-time synchronization.

WLAN Configuration

“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access

Points and wireless clients attempting to connect to a specific WLAN (Wireless Local

Area Network) must use the same SSID. The default setting is default. Note: The

maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, >

and space character.

“Wireless mode” Clicking on the pull-down menu to select from the following

options:

“Infrastructure” Make the Network Camera connect to the WLAN via an Access Point.

(The default setting)

“Ad-Hoc” Make the Network Camera connect directly to a host equipped with a

wireless adapter in a peer-to-peer environment.

“Channel” While in infrastructure mode, the channel is selected automatically to

match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel

must be manually set to the same channel for each wireless adapter. The default

channel setting depends on the installed region.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 65 66

No comments

Vivotek PT3123 User Manual Page 35