Vivotek PZ7121 User Manual download pdf (Page 33)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

User's Manual - 33

PPPoE (Point-to-point over Ethernet)

Select this option to congure your Network Camera to make it accessible from anywhere as long as

there is an Internet connection� Note that to utilize this feature, it requires an account provided by your

ISP�

Follow the steps below to acquire your Network Camera’s public IP address�

1� Set up the Network Camera in LAN�

2. Go to Home > Conguration > Application > Server Settings (please refer to Server Settings on page

65) to add a new server -- email or FTP server�

3. Go to Conguration > Application > Media Settings (please refer to Media Settings on page 57)� Select

System log so that you will receive a list of system log in TXT le format which contains the Network

Camera’s public IP address in your email or on the FTP server�

4. Go to Conguration > Network > Network Type. Select PPPoE and enter the user name and password

provided by your ISP� Click Save to take effect�

5� The Network Camera starts to reboot�

6� Disconnect the power source of the Network Camera; remove it from the LAN environment to the

Internet�

NOTE

► If the default ports are already used by other device connecting to the same router, the Network

Camera will select other ports for the Network Camera�

► If UPnP

is not supported by your router, you will see the following message:

Error: Router does not support UPnP port forwarding.

► Steps to enable UPnP

user interface on your computer:

Note that you must log on to the computer as a system administrator to install the UPnP

components�

1� Go to Start, click Control Panel, and then click Add or Remove Programs�

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 117 118

No comments

Vivotek PZ7121 User Manual Page 33