Vivotek ND8301 User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 210
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
VIVOTEK
User's Manual - 15
Network Deployment
1. Connect the supplied power adapter to a power outlet.
2.
Connect network cameras to the NVR’s LAN ports.
3. If you want to access NVR over the Internet, connect the NVR to the Internet via the WAN
port. A web console can be established from a remote PC by keying http://<public IP>:3454 in
a browser’s URL address eld. However, port forwarding on the router for the TCP port will be
necessary.
4. Push the power button to run the NVR.
Router
Internet
Router
Default Fixed IP:
192.168.1.10
LAN WAN
Switch
Wireless AP / Router
Clients
The LAN and WAN ports can be congured into the same or different subnets.
You may also connect cameras through the WAN port. If you have cameras connected via the
WAN port, make sure the WAN port and the cameras connected through it acquire static IP
addresses even when the WAN port is connected to router or AP. If not, the cameras detected
through the WAN port will use the default IPs, e.g., 169.254.xx.xx, and the LiveClient software
will not be able to detect their presence.
NOTE:
Default: DHCP
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 209 210

Comments to this Manuals

No comments