Vivotek ND8401 User Manual download pdf (Page 84)

VIVOTEK

84 - User's Manual

How to Edit Recording Stoage

By default, all devices (cameras) are assigned to the default recording storage. You can

manually remove a device from the default recording storage. However, only those devices

which belong to a recording storage can produce recorded media les.

Another purpose of setting the recording storage is that you can divide all the managed devices

into several recording storages, and for each storage group, you can assign several hard-disks

or disk volumes (with its unique recording paths) to store media data. The live media data will be

stored in the rst assigned hard-disk initially, and when the available space of the rst hard disk

reaches the preset threshold for a reserved space, the media data will be stored in the following

disk and so on. If the available space of the last disk reaches the threshold of reserved space,

the recorded les in the rst disk will be overwritten with the new media data. This procedure is

called "Cyclic Recording".

Recording Storage Settings

Please follow the steps below to set up recording storages for a station:

a. Select the target station from the hierarchical management tree.

b. Click Conguration > Station Settings > Recording Storage Settings on the menu bar (or right-

click the station on the hierarchical management tree and select Station Settings > Recording

Storage Settings). You can also right-click DefaultGroup under the station and click Recording

Storage Settings since all devices are assigned to the Default Storage Group by default settings.

c. The Recording Storage Settings window will pop up.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 200 201

No comments

Vivotek ND8401 User Manual Page 84