Vivotek VS2403 User Manual download pdf (Page 15)

- 14 -

www.vivotek.com

Ethernet Environment

Hardware installation

Before installing multiple Video Server’s at the well-chosen locations, the administrator

should memorize the serial numbers on the packages respectively for future use.

Cable connection

Shut down all the peripheral devices prior to connection. The video BNC, Ethernet cable

and power adapter are essential for basic viewing function. If the attached cameras

belong to the same motorized model, they can be concatenated to single COM port and

will be differed by camera ID set on the cameras. Refer to the related configuration

section for detailed description.

Power on

Make sure all cables are correctly and firmly connected. Before turning on Video Server,

remember to run Installation Wizard on PC or notebook in the same network first. As

long as the “Reset the IP address at next boot” option in network Web page is

enabled, the Installation Wizard is needed to install Video Server. Turn on cameras,

sensors, alarm devices, and then attach power adaptor of Video Server to the electric

power socket. After the POST (power-on self test) is complete and the result is

successful, Video Server is ready for software configuration as described in this manual.

At this stage, network speed and video modulation type are automatically detected.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

No comments

Vivotek VS2403 User Manual Page 15