Vivotek VS2403 User Manual download pdf (Page 48)

- 47 -

www.vivotek.com

Practical examples

The script file is limited to maximum 500 characters and 12 lines. The actual

performance will depend on the complexity of the command script. Administrators

should reduce the redundant check as possible. Overload conditional check and heavy

actions may retard the system operation.

Command line Description

MAB=1C; When any motion is detected on channel 1 or 2, “Normal Close”

of relay output 1 will short with “Common”.

1H*2\=(5)1O; When DI1 high companied with DI2 transient from high to low,

“Normal Open” of relay output 1 will short with COMMON in 5

seconds.

B\+C\+D\=W{192.

168.0.1:6000}{no

signal!};

If there is no signal on channel 2 or 3 or 4, a message “no

signal!” will be sent to port 6000 of 192.168.0.1 once.

2H=VAP15; When sensor input 2 is high, drive the camera mapped to video

1 to go to preset location 15.

MCD=UF+SABCD+

N{video%c%a@%

y%M%d%h%m%s

};

If any motion is detected on channel 3 or 4, upload snapshots

taken on channel 1, 2, 3 and 4. If an event triggered at 19:05:30

2002/10/15, the snapshot files will be named as,

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 83 84

No comments

Vivotek VS2403 User Manual Page 48