Vivotek DVR ND8301 User Manual download pdf (Page 49)

VIVOTEK

User's Manual - 49

g. At the bottom of the window, there is a eld for you to alter the camera settings including Connection

Settings and Recording Settings. You can apply the new settings to each camera on the list, or

click Apply to All to apply the same congurations to all the cameras. For more information about

Connection Settings and Recording Settings, please refer to Insert Device on page 37 for detailed

information.

When you modify the camera settings, and when the connection information (Conguration Protocol and

Conguration Port) does not match the current network environment, the camera will be disconnected and the

status of the camera will become “Camera cannot be found” as shown below.

h. Specify host: If you want to add a camera to the list, click Specify

Address to directly add a wanted camera. Click Add after lling in

the correct information. The camera will be added to the list of the

Batch Insert Camera window.

i. By default, all inserted devices will be applied to the default

recording storage. Deselect the Add checkbox if you do not want

to assign the selected devices to the default recording storage.

j. Click Insert when all the settings are done. Cameras will be added.

NOTE:

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 211 212

No comments

Vivotek DVR ND8301 User Manual Page 49