Vivotek IP Surveillance User Manual download pdf (Page 19)

VIVOTEK - Built with Reliability

User's Manual - 19

To power up and power down,

On the initial conguration:

1. Connect the power adapter between the system and power outlet.

2. Turn on the system by pressing the power button for more than one second.

After the initial connection,

1. Press the power button for 1 second to power on.

2. Press the power button for 4 second to power down. the system should start ushing the

cache contents in system memory and gracefully shut down.

Power Up and Power Down

1. No storage system is completely fail-safe. Damage to data might occur due to le system

corruption, operating system malfunction, virus infection, HDD component failures, and so on.

Therefore, it is highly recommended to regularly back up your data, and VIVOTEK disclaims

responsibilities of data loss or recovery.

2. Always power off the system using the power button. Do not disconnect the power cord while

the system is still operating. Doing so will result in data inconsistencies. The normal power-of

procedure allows cached data to be written to disks.

If system buzzer is sounded, turn it off in Settings > Logs > Error page. Click the Stop buzzer

sound button.

Serious system faults, such as a missing volume, can trigger the system buzzer. Verify the

cause of system fault and turn off the buzzer.

NOTE:

WARNING:

On a local console, go to the Settings

window, a Mute button is available there.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 182 183

No comments

Vivotek IP Surveillance User Manual Page 19