9520 Network Camera User Manual
- 10 - Digital Zoom Click on the magnifier icon under the camera view. The digital zoom control panel is shown. Uncheck “Disable digital zoom
- 11 - Client settings There are four settings for the client side in IE. The first option is “Stream Options” for users to determine which s
- 12 - to open a specific port to stream under some network environments. If there are no special network requirements, UDP unicast protocol
- 13 - Administration Only the Administrator can access the system configuration. Each category in the left column will be explained in the fo
- 14 - System parameters Host name: The text displays the title at the top of the main page. Turn off the LED indicator: Check this option
- 15 - Security Settings Password Protection The Network Camera is shipped without a password by default. This means that everyone can access
- 16 - 1 2 3
- 17 - Network settings Any changes made on the Network type section will restart the system in order to validate the changes. Make sure every
- 18 - HTTP Authentication: Supports basic and digest modes. Http port: This may be changed from the default Port 80. Once the port is change
- 19 - Always multicast: Select this to always enable multicast. Multicast group address: This is used by sources and the receivers to send an
- 1 - Before You Use This Product The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a h
- 20 - <url> http://<Network Camera>/setup/ddns.html <Network Camera> is the domain name or original IP address of the Netw
- 21 - Access List The access list is used to control the access permission of clients by checking the client IP address. There are two li
- 22 - Audio and Video This product supports dual-stream. It provides two settings for video streams, but only one setting for audio. Video
- 23 - bandwidth when images are moving rapidly. Consequently, to ensure detailed video quality (quantization rate) regardless of the network,
- 24 - Image Settings Click on this button to pop up another window to tune “Brightness”, “Contrast”, “Hue” and “Saturation” for video com
- 25 - Best Real-time Images To achieve the best real-time visual effect, the network bandwidth should be large enough to allow a transmi
- 26 - number of users viewing on the network, even if the parameters have been initially finely tuned. Performance will also suffer due to po
- 27 - Privacy Mask Click on Privacy Mask button to bring up the privacy mask window. Up to five privacy masks can be created. When enable
- 28 - The above figure appears on the screen when is clicked and the privacy mask is enabled. Motion detection Enable motion detection: C
- 29 - Once Saved, the monitoring window will have a red outline and the graphic bar goes red when motion has been detected. <url> ht
- 2 - Table of Contents Before You Use This Product ...1 Table of Contents
- 30 - Application There are three sections in application page. They are event, server and media. To add a new event, server, or media, cli
- 31 - <url> http://<Network Camera>/setup/application.htm <Network Camera> is the domain name or original IP address of th
- 32 - If there are servers configured, the user can select them from “Server name.” Trigger DO: Check this to trigger digital output for spec
- 33 - The following are the settings for an FTP server: Server address: The domain name or IP address of the external FTP server. Server por
- 34 - Media Media name: The unique name for the media. There are three kinds of media: snapshot, video clip, and system log. Snapshot setti
- 35 - Video clip settings: Source: The source of stream, stream1 or stream2. Pre-event recording: The interval of pre-event recording in seco
- 36 - <url> http://<Network Camera>/setup/recording.htm <Network Camera> is the domain name or original IP address of the
- 37 - Build a Security Application The Administrator can use the built-in motion detection to monitor any movement and perform many useful
- 38 - 8. Click on “Save” to enable the activity display. Green means the motion in the window is under the watermark set by Administrator, a
- 39 - Maintenance Four actions may be selected: Reboot: Click the reboot button to restart system. Restore: Click this to restore all settin
- 3 - Package Contents• DVT9520 • Power adapter • CD • Quick Installation guide • Accessory kit Installation In this manual, "User&q
- 40 -
- 41 - Restoring the factory defaults will erase any previous settings. Reset or restore the system after power on. Appendix A. Troubleshooti
- 44 - B. Technical specifications - System CPU: VVTK-1000 RAM: 64MB SDRAM ROM: 8MB FLASH ROM - Networking Protocol TCP/IP, HTTP, SMTP, F
- 45 - Technology License Notice AMR Technology This product includes AMR narrowband speech coding technology licensed by VoiceAge. Please r
Electromagnetic Compatibility (EMC) This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. • This device
- 5 - Network Installation Make sure the network cable is firmly connected to both the camera and the network switch. After attaching the Ethe
- 6 - Once installation is complete, the Administrator should proceed to the "Initial Access to the Network Camera" section for nece
- 7 - How to Use A PC with a Windows operating system can use Internet Explorer (IE) to connect to the Network Camera. A plug-in will be inst
- 8 - Installing plug-in For initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-
- 9 - User Interface Main Screen with Camera View The main page layout has two parts: • Configuration functions: The camera can be configu
Comments to this Manuals