Vivotek V User Manual download pdf (Page 41)

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

DDNS & UPnP

“Enable DDNS” This option turns on the DDNS function.

“Provider” The provider list contains four hosts that provide DDNS services. Please

connect to the service provider’s website to make sure the service charges.

“Host Name” If the User wants to use DDNS service, this field must be filled. Please

input the hostname that is registered in the DDNS server.

“Username/E-mail” The Username or E-mail field is necessary for logging in the

DDNS server or notify the User of the new IP address. Note: when this field is input

as “Username” the following field must be input as “Password”.

“Password/Key” Please input the password or key to get the DDNS service.

“Enable UPnP” This turns on or off the UPnP function. When UPnP is turned off, the

camera cannot be found through network neighbors in MS Windows XP. If the UPnP

network component is installed in Windows XP, the hostname of the Network Camera

will be shown with bracketed IP address in the Network neighbors. Ex: Network

Camera with Pan/Tilt (xxx.xxx.xxx.96). That is: The hostname of the Network

Camera is “Network Camera with Pan/Tilt”, and the IP address of the Network

Camera is xxx.xxx.xxx.96, depends on the last value of the IP address assigned to

the Network Camera.

“Enable UPnP Port Forwarding” This turns on or off the UPnP port forwarding

function. If your camera is behind an NAT router and your router supports UPnP port

forwarding, turn on this option will help you to access your camera.

“Save” Click on this button to save current settings for the DDNS service and UPnP

function.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 90 91

No comments

Vivotek V User Manual Page 41