Vivotek 63E-M User Manual download pdf (Page 58)

VIVOTEK

58 - User's Manual

Please follow the steps below to set up a prole:

1. Check Enable and apply this prole to.

2. Select the applicable mode: Day mode, Night mode,

or Schedule mode. Please manually enter a range of

time if you choose Schedule mode.

When a span of time is congured using the Schedule

mode, you can configure the Day/Night setting for

controlling the behavior of the IR cut lter during that

time.

3. Configure Exposure control settings in the folowing

columns. Please refer to previous dicussions for

detailed information.

4. Click Save to enable the setting and click Close to exit

the window.

Exposure Prole: (Only available when the IR cut lter is not set to the Auto mode)

If you want to congure another sensor and exposure setting for an individual day/night/schedule mode,

please click Prole to open the Prole of exposure settings page as shown below.

Activated period:

Select the mode this profile to apply to: Day mode, Night mode, or Schedule mode.

Please manually enter a range of time if you choose Schedule mode. Then check Save to take effect.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 215 216

No comments

Vivotek 63E-M User Manual Page 58