Vivotek 63E-M User Manual download pdf (Page 66)

VIVOTEK

66 - User's Manual

Network > General settings

This section explains how to congure a wired network connection for the Network Camera.

Network Type

LAN

Select this option when the Network Camera is deployed on a local area network (LAN) and is intended

to be accessed by local computers. The default setting for the Network Type is LAN. Please rememer to

click on the Save button when you complete the Network setting.

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by

the DHCP server each time the camera is connected to the LAN.

Use xed IP address: Select this option to manually assign a static IP address to the Network Camera.

1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network

Camera on LAN. Please refer to Software Installation on page 21 for details.

2. Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP or network

administrator.

Subnet mask: This is used to determine if the destination is in the same subnet. The default value is

“255.255.255.0”.

Default router: This is the gateway used to forward frames to destinations in a different subnet. Invalid

router setting will disable the transmission to destinations across different subnets.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 215 216

No comments

Vivotek 63E-M User Manual Page 66