Vivotek VS2402 Specifications download pdf (Page 18)

- 15 -

Shut down the peripheral devices prior to connection and keep the power adaptor

unplugged until other cables are firmly connected. In the environment without Ethernet,

administrators can use the included null modem cable to connect to Video Server directly

and access point-to-point. After necessary information is entered and saved, turn off

Video Server and remove the null modem cable. Follow the installation of modem mode

in next paragraph to connect to Internet. Note Video Server will not really reset system

where it is used to in null modem mode.

Modem mode

If users have setup a remote dialup server or subscribed to an ISP service, Video Server

can be configured to dial to the server upon user-defined events. Otherwise it will wait

permanently for the user’s call to establish a network connection to provide services.

Before installation, make sure the necessary dialing information is correctly setup via

Ethernet or null modem connection.

Power on

Make sure all cables are correctly and firmly connected. Turn on cameras, sensors, alarm

devices, and then finally attach the power adaptor of Video Server to the electric power

outlet. Since most automatic detections of hardware perform when the system starts,

Video Server should be turned on after all peripherals are turned on and ready.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

No comments

Vivotek VS2402 Specifications Page 18