Vivotek VS2402 Specifications Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 96
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
- 33 -
SMTP account name 2” The account login name for the second SMTP server.
SMTP password 2” The password is for the second SMTP account name.
Sender email address” The return email address used in the event the mails fail to be
sent out
FTP settings
Local FTP server port” This can be other than the default Port 21. The user can
change this value from 1 to 65535. After the changed, the external FTP client program
must change the server port of connection accordingly.
1st FTP server” The domain name or the IP address of the external FTP server. The
following user settings must be correctly configured for remote access.
1st FTP user name” Granted user name on the external FTP server.
1st FTP password” Granted password on the external FTP server.
1st FTP remote folder” Granted folder on the external FTP server. The string must
conform to that of the external FTP server. Some FTP servers cannot accept preceding
slash symbol before the path without virtual path mapping. Refer to the instructions for
the external FTP server for details. The folder privilege must be open for upload.
Primary FTP passive mode” The Video Server located inside the network protected
by a firewall, data connection for FTP may be prohibited. By selecting passive mode, the
FTP can bypass the rule and allow snapshot upload to proceed. If the passive mode is
selected, the Video Server can automatically attempt for active mode, if the external FTP
server does not support passive mode.
2nd FTP server” The domain name or IP address of the external FTP server.
2nd FTP user name” Granted user name on the backup FTP server.
2nd FTP password” Granted password on the backup FTP server.
2nd FTP remote folder” Granted folder on the backup FTP server.
Secondary FTP passive mode Passive mode setting for the backup FTP server.
In either e-mail or FTP, the primary server information should be entered first. If the
primary server is not set, the related FTP or email will be cancelled. Note that it may take
time to connect to the secondary server after the first one fails and it may affect some
applications when conditions happen too often.
After everything is set, click on
. A warning message will pop out for confirmation.
After clicking on
, Video Server will automatically restart. If "Reset network at
next boot" is kept checked, perform software installation again. Otherwise Video Server
will boot up according to the new configuration automatically.
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Comments to this Manuals

No comments