Vivotek VS2402 Specifications download pdf (Page 43)

- 40 -

Application constitution

Administrators can use combinations of options on the application page to perform many

useful security applications. Video Server provides two application modes; one is

performed according to the settings on the web page, the other is performed according

to the external command script. Though most settings will automatically be done by the

Application Wizard

, administrators still can adjust the settings from this page.

Weekly schedule

A useful weekly schedule is provided for daily security application. Administrators can

select weekdays from Monday to Friday with the daily schedule from 9:00 am to 6:00 pm

that no one is at home to perform any event checking. If the security system needs to be

installed in office that no one is there during the nights or weekend, administrators just

set the time period as above, then check “All the time except for the above

schedule” for opposite operations.

External command script

Administrators can write a script named SCRIPT.TXT to perfectly match the additional

software according to the Command Script for Complex Applications

section in the

Chapter Advanced Functions

. After uploading this script to Video Server via FTP, check

the option “Enable the external script file to exclude the following settings”.

Otherwise Video Server will operate according to the settings below.

Event operation

Video Server provides general options for two basic applications, event operation for

security and sequential operation for web attraction. In event operation,

administrators have to setup some conditions to check and some actions to happen

consequently. The conditions include motion detection on any video channel and the

status of any digital inputs. While checking motion in video, administrators should click

on the monitored video channel to configure the appropriate parameters. In the newly

opened window, percentage of object size over whole window and sensitivity can be

fine tuned to fit into the environment. If any motion is over the settings, an ‘M’ will

appear on the upper-right corner of image for indication. The ‘M’ will appear in the image

to indicate some motion is detected as long as “Show alert in image” is checked. If

there are any sensors attached to the digital inputs, administrators can set the state to

fire alarm. There are four states of “High”, “Low”, “Rising” and “Falling” plus “Disable”.

The edge trigger like “Rising” or “Falling” is generally used to detect the emerging signal

from the external sensor. Once any event happens, administrators can select “DO

action” and/or send snapshots that are taken right at the moment. There is also a

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 95 96

No comments

Vivotek VS2402 Specifications Page 43