Vivotek VS3102 Installation Guide download pdf (Page 16)

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Power on

Make sure all cables are correctly and firmly connected before turning on the Video Server. Turn on

cameras, sensors, alarm devices, and then attach the power adaptor of the Video Server to the electric

power socket*. After the POST (power-on self test) is complete and the result is successful. At this stage,

network speed and video modulation type are automatically detected. After addressing procedure is

completed, the Video Server is ready. If the detection of video modulation fails, Administrator may

change the setting on the configuration page. Refer to the configuration section for further information.

Connect the jack of the power adapter to Video Server prior to plugging the utility end into the

utility power socket. It will reduce accidental electric surge shock.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 82 83

No comments

Vivotek VS3102 Installation Guide Page 16