Vivotek VS3102 Installation Guide download pdf (Page 55)

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

If the attached motorized camera is not on the support driver list, choose the proper UART interface and

pull down the driver list to select Custom Camera type and click on

for further

configuration.

Setup the serial "Port Settings" according to the instruction manual of the custom camera. Then enter the

specific command related to PTZ in the respective field. The custom command for "Control Setting"

should be edited in ASCII format. The Video Server will interpret the ASCII format command to binary

string. For instance, “012000ABCD” will be sent out of the COM port as five hexadecimal bytes of 01,

20, 00, AB and CD. If the command string is composed of two or more commands, a comma ‘,’ should be

inserted to separate each command. Each comma represents 200 milliseconds. For instance, a command

to pan left may be “01000305” and a command to stop panning may be “01000300”. The user may edit

the applicable command as “01000305, 01000300” in the Move Left field. This means the camera will

pan left for 200 milliseconds. When everything is set, click on

to save the commands and click on

to close the command setting window.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 82 83

No comments

Vivotek VS3102 Installation Guide Page 55