Vivotek VS3102 User Manual download pdf (Page 14)

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

How to Install

To easily fit into various environments, VisualServer automatically detects the attached interfaces and

configures itself to the best condition. Therefore users need not care whether the connected cameras are

either NTSC or PAL, how to select the network between Ethernet and modem, and whether the Ethernet

speed is 10Mbps or 100 Mbps. If the connected motorized camera is on the support list, users only need

to plug and play without complicated configurations.

VisualServer supports Ethernet and modem interfaces according to the user's existing network. Ethernet

can provide higher bandwidth to achieve the best performance while dial-up network with modem is more

common in current Internet applications. Refer to the related installation section for your network

environment. If both interfaces are available, Ethernet is recommended and will be chosen as the first

priority if Ethernet cable and modem are concurrently attached. Managing to install in the other interface

will automatically clear the previous network settings to start new installation.

In the following content, "user" refers to those who can access VisualServer and "administrator" refers to

the supervisor who has the root password to configure VisualServer in addition to general access.

Administrators should carefully read this manual, especially during installation.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 97 98

No comments

Vivotek VS3102 User Manual Page 14