Vivotek IP7131 User Manual download pdf (Page 51)

- 50 -

www.vivotek.com

Appendix

A. Troubleshooting

Status LED

The following table lists the LED patterns in general.

Condition LED color

Loading system after power on Steady green and blink red (once)

During booting procedure Steady green

Detecting and setting network Steady orange (green + red) till IP address

is confirmed

After network is setup (system up) Blink green / orange every second and

steady red

During the upgrade firmware process Blink green / orange every second and fast

blink red

Reset and restore

There is a button in the back of the Network Camera. It is used to reset the system or

restore the factory default settings. Sometimes resetting the system sets the system

back to normal state. If the system problems remain after reset, restore the factory

settings and install again.

RESET: Click on the button.

RESTORE:

Status LED Color Description

Blinking red Power is being supplied to the camera.

Solid green The camera is booting up.

Solid green with blinking red in between The camera is trying to obtain an IP address.

Solid green and red An IP address is successfully assigned to the camera.

Solid red with blinking green in between The camera is working.

Blinking red and green During rmware upgrading

User's Manual - 50

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 72 73

No comments

Vivotek IP7131 User Manual Page 51