Vivotek IP7133/IP7134 User Manual download pdf (Page 26)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

26 - User's Manual

► Enabling UPnP port forwarding allows the Network Camera to open secondary HTTP port on the

router, not HTTP port, meaning that you have to add the secondary HTTP port number behind the

Network Camera’s public address in order to access the Network Camera from the Internet. For

example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list

below for the Network Camera’s IP address.

From the Internet In LAN

http://203.67.124.123:8080 http://192.168.4.160 or

http://192.168.4.160:8080

► If the PPPoE settings are incorrectly conﬁgured or the Internet access is not working, restore the

Network Camera to factory default; please refer to Restore on page 52 for details. After the Network

Camera is reset to factory default, it is accessible in LAN.

HTTP

Authentication: Depending on your network security requirements, the Network Camera provides two

types of security settings for a HTTP transaction: basic and digest. If basic authentication is selected,

the password is sent in plain text format; there can be potential risks of being intercepted. If digest

authentication is selected, user credentials are encrypted in MD5 algorithm and thus provide better

protection against unauthorized accesses.

HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP port is

set to 8080. Also, they can be assigned with another port number between 1025 and 65535. If the ports

are incorrectly assigned, the following warning messages are displayed:

To access the Network Camera within LAN, both HTTP port and secondary HTTP port can be

used to access the Network Camera. For example, when the HTTP port is set to 80 and the

secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.

In LAN

http://192.168.4.160 or

http://192.168.4.160:8080

Access name for stream 1 / Access name for stream 2: The access name is used to differentiate the

streaming source. When using Mozilla Firefox or Netscape to access the Network Camera, and the video

mode is set to JPEG, users will receive continuous JPEG pictures. This technology, known as “server

push”, allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape.

Use http://<ip address>:<http port>/<access name for stream1 or stream2> to make connection.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 86 87

No comments

Vivotek IP7133/IP7134 User Manual Page 26