Vivotek IP7133/IP7134 User Manual download pdf (Page 42)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

42 - User's Manual

A green bar indicates that even though motions are detected, the event will not be triggered

because the image variations are still falling under the deﬁned threshold.

NOTE

► How does motion detection work?

There are two parameters for setting the motion detection: Sensitivity and Percentage. In the

illustration above, frame A and frame B are two sequential images. Pixel differences between the

two frames are detected and highlighted in gray (frame C), and will be compared with the sensitivity

setting. Sensitivity is a value that expresses the sensitivity to moving objects. Higher sensitivity

settings are expected to sense a slight movement while smaller sensitivity settings tend to neglect

it. When the sensitivity is set to 70%, the Network Camera deﬁnes the pixels in the purple areas as

“alerted pixels” (frame D).

Percentage is a value that expresses the proportion of “alerted pixels” to all pixels in the motion

detection window. In this case, 50% of pixels are identiﬁed as “alerted pixels”. When the percentage is

set to 30%, the motions are judged to exceed the deﬁned threshold; therefore, the motion window will

be outlined in red.

For applications that require higher security management, it is suggested to set higher sensitivity

settings and smaller percentage values.

Percentage = 30%

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 86 87

No comments

Vivotek IP7133/IP7134 User Manual Page 42