Vivotek IP7133/IP7134 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 87
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
8 - User's Manual
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port
■ RTSP port
■ RTP port for audio
■ RTCP port for audio
■ RTP port for video
■ RTCP port for video
If you have changed the port numbers on the Network page, please open the ports accordingly
on your router. For information on how to forward ports on the router, please refer to the user’s
manual of your router.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 23 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera and
follow the steps below.
1. Set up the Network Camera in LAN. Please refer to Software installation on page 9 for details.
2. Go to Configuration > Network > Network Type. Select LAN > Use fixed IP address.
3. Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 24 for details.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 86 87

Comments to this Manuals

No comments