Vivotek WIRELESS PAN/TILT PT7137 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 79
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
- 23 -
www.vivotek.com
For Viewing by Mobile Phone
Most 3GPP cell phone supports media streaming with MPEG4 video and GSM-AMR
audio. Due to the limitation of the bandwidth for 3GPP, only 176x144 size video is
supported for cell phone viewing. Select the “Configure for mobile viewing” option will
change the range of other related video settings.
For Best Real-time Video Images
To achieve good real-time visual effect, the network bandwidth should be large enough
to allow a transmission rate of greater than 20 image frames per second. If the
broadband network is over 1 Mbps, set the “Fix bit rate” to 1000Kbps or 1200Kbps. The
maximum frame rate is 30. If your network bandwidth is more than 512Kbps, you can
fix the bit rate according to your bandwidth and set the maximum frame rate to 30 fps.
If the images vary dramatically in your environment, you may want to slow the
maximum frame rate down to 20 fps in order to lower the rate of data transmission.
This allows for better video quality and the human eyes cannot readily detect the
differences between those of 20, 25, or 30 frames per second. If your network
bandwidth is below 512 Kbps, set the “Fix bit rate” according to your bandwidth and try
to get the best performance by fine-tuning with the “Maximum frame rate”. In a slow
network, greater frame rate results in blur images. Another work-around is to choose
“160x120” in the “Size” option for better images. Video quality performance will vary
somewhat due to the number of users viewing on the network; even when the
parameters have initially been finely tuned. Performance will also suffer due to poor
connectivity because of the network’s burst constraint.
Only Quality Images Will Do
To have the best video quality, you should set “Fix quality” at “Detailed” or “Excellent”
and adjust the “Maximum frame rate” to match your network’s bandwidth. If your
network is slow and you receive “broken” pictures, go to the TCP protocol in
“Connection type” and choose a more appropriate mode of transmission. The images
may suffer a time delay due to a slower connection. The delay will also increase with
added number of users.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 78 79

Comments to this Manuals

No comments