Vivotek WIRELESS PAN/TILT PT7137 User Manual download pdf (Page 53)

- 52 -

www.vivotek.com

Maintenance

Four actions can be selected

“reboot” click the reboot button to restart system

“factory default” Click on Factory default button on the configuration page to restore

the factory default settings. Any changes made so far will be lost and the system will be

reset to the initial factory settings. The system will restart and require the installer

program to set up the network again.

“Calibrate”

Recalibrate the home position to the default center to recover the tolerance cased by

some external forces. This function is the same as the “Center” button on the Remote

Controller. Please note that there is no confirming message box after clicking on the

“Calibrate” button, the Network Camera will calibrate immediately.

“upgrade firmware” Select the firmware file and click upgrade button

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 78 79

No comments

Vivotek WIRELESS PAN/TILT PT7137 User Manual Page 53