Vivotek WIRELESS PAN/TILT PT7137 User Manual download pdf (Page 8)

- 7 -

www.vivotek.com

Installation

In this manual, "User" refers to whoever has access to the Network Camera, and

"Administrator" refers to the person who can configure the Network Camera and grant

user access to the camera.

Hardware installation

Please verify that your product package contains all the

accessories listed in the foregoing Package Contents.

Depending on the user’s application, an Ethernet cable

may be needed. The Ethernet cable should meet the specs

of UTP Category 5 and not exceed 100 meters in length.

Upon powering up, the front red LED will become lighted first and then the device will go

through booting process. During the booting process, red, blue and green LEDs will be

on. After booted, the Network Camera will standby for getting IP address. After getting IP

Address, the green LED will blink every second.

The Network Camera will first detect Ethernet. If it does not connect to Ethernet, the

Network Camera will try WLAN. During the searching and connecting process to the

wireless access point or station, the red LED of the Network Camera will flash every

second. Until the Network Camera connects to the other wireless device, the red LED

Connect the power adapter jack to the Network

Camera before plugging in to the power socket. This will

reduce the risk of accidental electric shock.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 78 79

No comments

Vivotek WIRELESS PAN/TILT PT7137 User Manual Page 8