Vivotek FD7130 User Manual download pdf (Page 13)

EN - 12

Attach the dome cover to camera. Secure the dome screws with the supplied screwdriver. Finally,

make sure all parts of the camera are securely installed.

Completion

Fine-tune the Camera Focus

The focus of this network camera is set from 1.0m to inﬁnity by factory default. If you want to focus

on objects closer than 1.0m or the lens has lost focus, please ﬁne tune it in the following way.

Tighten the lens lock screw.

1. Loosen the lens lock screw.

2. Manually rotate the lens to ﬁne-tune the focus

until the live image is clear.

3. Tighten the lens lock screw.

Please secure the screws tightly to

prevent the cabling against moisture.

Tear down the aluminum foil vacuum bag and take out the silica gel. Attach the supplied silica gel to

the inner side of the Network Camera. (Please replace the silica gel with a new one if you open the

back cover after installation.)

1 2 ... 8 9 10 11 12 13 14

No comments

Vivotek FD7130 User Manual Page 13