Vivotek FD8163 User Manual download pdf (Page 5)

EN - 4

General Connection (without PoE)

Network Deployment

POW

OLL

ION

CEIVE

PARTITIO

1. If you have external DI devices, make the connection from general I/O terminal block.

2. Ethernet, power, and other cables are user-supplied.

3. Connect the AC cables from the terminal block as an alternate power source. The IO

cables are user-supplied.

1. Attach the alignment sticker to the ceilling/wall.

2. Through the two circles on the sticker, drill two pilot holes into the ceilling/wall.

3. The Network Camera can be mounted with the cable routed through the ceiling/wall or

from the side. If you want to feed the cable through the ceiling/wall, drill a cable hole.

4. Hammer the supplied plastic anchors into the holes.

5. Align the two holes on each side of the camera base with the two plastic anchors on the

ceilling/wall, insert the supplied screws to corresponding holes and secure them with a

screwdriver.

Wall Mount

Ceiling Mount

Ethernet

Switch

Pin3 & 4 AC 24V

Pin #3 & 4 AC 24V as alternate power are for

indoor use only

NOTE:

1 2 3 4 5 6 7 8 9 10 11

No comments

Vivotek FD8163 User Manual Page 5