Vivotek IP8332-C User Manual download pdf (Page 68)

VIVOTEK

68 - User's Manual

Day/Night Settings

Switch to B/W in night mode

Select this to enable the Network Camera to automatically switch to B/W during night mode.

IR cut lter

With a removable IR-cut lter, this Network Camera can automatically remove the lter to let IR light into

the sensor during low light conditions.

■ Auto mode

The Network Camera automatically removes the lter by judging the level of ambient light.

■ Day mode

In day mode, the Network Camera switches on the IR cut lter at all times to block infrared light from

reaching the sensor so that the colors will not be distorted.

■ Night mode

In night mode, the Network Camera switches off the IR cut lter at all times for the sensor to accept

infrared light, thus helping to improve low light sensitivity.

■ Synchronize with digital input

The Network Camera automatically removes the IR cut lter when DI triggers. When the camera is

installed with external IR lights, you may let the digital input from the external devices determine when

to turn the IR cut lter on or off.

■ Schedule mode

The Network Camera switches between day mode and night mode based on a specied schedule.

Enter the start and end time for day mode. Note that the time format is [hh:mm] and is expressed in

24-hour clock time. By default, the start and end time of day mode are set to 07:00 and 18:00.

Light sensor sensitivity

Select Low, Normal, or High sensitivity for the light sensor.

Disable IR LED

If you do not want to use the IR illuminators, you can select this option to turn it off.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 174 175

No comments

Vivotek IP8332-C User Manual Page 68