Vivotek FD7131 User Manual download pdf (Page 8)

- 7 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Installation

In this manual, "User" refers to whoever has access to the Network Camera, and

"Administrator" refers to the person who can configure the Network Camera and grant

user access to the camera.

Hardware installation

Please verify that your product package

contains all the accessories listed in the

foregoing Package Contents. Depending

on the user’s application, an Ethernet cable

may be needed. The Ethernet cable should

meet the specs of UTP Category 5 and not

exceed 100 meters in length.

Upon powering up, the status LED will become lighted first and then the device will go

through booting process. The status LED will be steady orange for getting IP address.

After getting IP Address, the LED will blink orange and red as heartbeat to indicate

alive.

To install in Ethernet

Make sure the Ethernet is firmly connected to a switch hub. After attaching the

Ethernet cable plug in the power adapter. If the LED turns out to blink orange-color, go

to next paragraph “Software installation”.

Connect the power adapter jack to the Network Camera before plugging in to

the power socket. This will reduce the risk of accidental electric shock.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 103 104

No comments

Vivotek FD7131 User Manual Page 8