Vivotek NETWORK CAMERA IZ7151 User Manual download pdf (Page 34)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

34 - User's Manual

rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>

For example, when the access name for stream 1 is set to live�sdp:

Launch a RTSP player�

Choose File > Open URL. This opens the URL dialog box.

Type the URL command in the text box�

For example:

The live video will be displayed in your player�

RTSP port /RTP port for video, audio/ RTCP port for video, audio :

The RTSP (Real-Time Streaming

Protocol) controls the delivery of streaming media� By default, the port number is set to 554�

The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients� By

default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558�

The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data

y monitoring Internet traffic volume� By default, the RTCP port for video is set to 5557 and the

RTCP port for audio is set to 5559�

The five ports can be changed between 1025 and 65535� The RTP port must be an even number

and the RTCP port is RTP port number plus one, and thus always be odd� When the RTP port

changes, the RTCP port will change accordingly�

If the RTP ports are incorrectly assigned, the following warning message is displayed:

Multicast settings for stream 1 / Multicast settings for stream 2 :

Select the Always multicast to

enable multicast for stream 1 or stream 2� Unicast video transmission delivers a stream through

point-to-point transmission; multicast, on the other hand, sends a stream to the multicast group

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 102 103

No comments

Vivotek NETWORK CAMERA IZ7151 User Manual Page 34