Vivotek FD8362 User Manual download pdf (Page 13)

EN - 12

1. Install the black cover.

2. Attach the dome cover to the camera by combining it to the retainer and aligning with the mounting

holes.

3. Secure the four dome screws with the supplied hex key wrench. Make sure all parts of the camera

are securely installed.

Completion

Based on the live image retrieved from the camera, adjust the camera lens by doing the following:

To adjust the viewing angle -- 3-axis mechanism design

1. Loosen the tilt adjustment screws and then turn the lens module up or down. Upon completion,

tighten the screw.

2. Turn the lens to adjust the image orientation.

Adjusting the Lens

The sophisticated 3-axis mechanism design offers very flexible, easy hardware

installation for either ceiling or wall mount.

Black

Cover

Horizontal Pan

350°

Lens Horizontal

Pan 350°

Vertical Tilt 80°Tilt Adjustment

Screws

NOTE:

You will find a silica gel bag attached to the

dome cover. Replace the silica gel included in the

camera with the one shipped within the accessory bag.

1 2 ... 8 9 10 11 12 13 14

No comments

Vivotek FD8362 User Manual Page 13