Vivotek IP7138 User Manual download pdf (Page 50)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

50 - User's Manual

■ Keep current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting

conditions�

1� Set the White balance to Auto and click Save�

2. Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust the color

temperature automatically�

3. Select Keep current value to conrm the setting while the white balance is being measured.

4� Click Save to enable the settings�

You can click Preview to fine-tune the image, or click Restore to recall the original settings without

incorporating the changes� When completed with the settings on this page, click Save to enable the

settings and click Close to exit the page�

Privacy Mask

Click Privacy Mask to open setting page. On this page, you can block out sensitive zones to address

privacy concerns�

■ To set the privacy mask windows, follow the steps below:

1� Click New to add a new window�

2. Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size

of the object (height and width) you want to cover�

3� Enter a Window Name and click Save to enable the settings�

4� Select Enable privacy mask to enable this function�

NOTE

► Up to 5 privacy mask windows can be set up on the same screen.

► If you want to delete the privacy mask window, please click the ‘x’ on the upper right-hand corner of

the window�

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 122 123

No comments

Vivotek IP7138 User Manual Page 50