Vivotek IP8161 Specifications download pdf (Page 71)

VIVOTEK

User's Manual - 71

Transparent HTTP Tunnel: If you want to use your own RS-485 device, you can use UART commands to

build a Transparent HTTP Tunnel� The UART commands will be sent through HTTP tunnel established

between the RS-485 device and the linked camera� For detailed application notes, please refer to URL

Commands on page 106 or http://www.vivotek.com/downloadles/faq/videoserver/UART_HTTP_Tunnel.

pdf�

Preset Positions

If you select DynaDome/SmartDOME, Lilin PIH-7x00, or Pelco D protocol as the PTZ driver and click

the Save button, the Preset Position button will be enabled� Click Preset Position to open the settings

page� You can also select preset positions for the camera to patrol� A total of 20 preset positions can be

congured.

Please follow the steps below to preset a position:

1� Adjust the shooting area to the desired position using the buttons on the right side of the window�

2� Enter a name for the preset position, which allows for up to forty characters� Click Add to enable the

settings� The preset positions will be displayed under the Preset Location list on the left-hand side�

3� To add additional preset positions, please repeat steps 1~2�

4� To remove a preset position from the list, select it from the drop-down list and click Delete�

5� The preset positions will also displayed on the main page� Please refer to the illustration on the next

page�

6� Click Save to enable the settings�

Functions are the same

as the Control Panel on

the home page

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 156 157

No comments

Vivotek IP8161 Specifications Page 71