Vivotek IP8372 User Manual download pdf (Page 51)

VIVOTEK

User's Manual - 51

You can click Restore to recall the original settings without incorporating the changes. When

completed with the settings on this page, click Save to enable the settings.

If you want to congure another sensor setting for day/night/schedule mode, please click Prole to

open the Prole of exposure settings page as shown below.

Activated period:

Select the mode this profile to apply to: Day mode, Night mode, or Schedule

mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to

take effect.

Please follow the steps below to setup a prole:

1. Check Enable this prole.

2. Select the applied mode: Day mode, Night

mode, or Schedule mode. Please manually

enter a range of time if you choose Schedule

mode.

3. Configure Exposure control settings in the

folowing columns. Please refer to previous

dicussions for detailed information.

4. Click Save to enable the setting and click Close

to exit the page.

Auto: If you set Exposure mode as Auto, the Exposure time and Gain control will not be

congurable since the sensor library will automatically adjust the value according to the ambient

light. Then you can congure iris mode as “indoor” or “outdoor” to reach the best image quality.

■ Iris mode:

Select Indoor or Outdoor iris mode to adapt to the installation. The preset iris

aperture setting will apply.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 200 201

No comments

Vivotek IP8372 User Manual Page 51