Vivotek MD8562 Specifications download pdf (Page 94)

VIVOTEK

94 - User's Manual

Applications - DI and DO

Advanced Mode

Digital input: Select High or Low to dene the activate status for the digital input. The Network Camera's

current status is shown on the right.

Set up the event source as DI on Event > Event settings > Trigger. Please refer to page 90 for detailed

information.

Applications - Tampering detection

This section explains how to set up camera tamper detection. With tamper detection, the

camera is capable of detecting incidents such as redirection, blocking or defocusing, or even

spray paint.

Please follow the steps below to set up the camera tamper detection function:

1. Check Enable camera tampering detection.

2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the

tampering factor (the difference between current frame and pre-saved background) exceeds the

trigger threshold.

3. Set up the event source as Camera Tampering Detection on Event > Event settings > Trigger.

Please refer to page 90 for detailed information.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 190 191

No comments

Vivotek MD8562 Specifications Page 94