Vivotek sd6122v User Manual download pdf (Page 60)

- 56 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Camera Control

On the Camera Control page, there are two main function control areas:

Camera control area

The pan and tilt functions can be controlled with these buttons. The “Left” button aims

the camera to the left; the “Right”, “Up”, and “Down” buttons aim the camera

accordingly. The “Home” button aims the camera to the center.

“-” and “+” buttons beside “Zoom” control the zoom widely function and zoom

telescopically.

“Pan speed” This controls the range of the horizontal movement of the camera. The

greater the value, the greater angular movement when performing the “Left” or

“Right” functions.

“Tilt speed” This controls the range of the vertical movement of the camera. The

greater value, the greater angular movement when performing the “Up” or “Down”

functions.

“Zoom speed” This controls the range of the zooming. The greater the value, the

greater viewing angle changed.

“Focus speed” This controls the range of the focus adjustment. The greater the value,

the greater adjustment.

“Auto pan/patrol speed” This defines the speed of panning and patrol, the greater

the value, the faster the speed.

Preset function area

“Disable motion detection during PTZ operation” Checking this box allows the

user to disable the motion detection function during PTZ operation. Otherwise, scene

change due to PTZ operation might be detected as motion.

“Current position” If the User wants to save the current view as a preset location,

enters a name for each of the current video view at “Current position” and click on the

“Add” button. The camera allows for ten preset locations.

* The preset function is valid only in optical zoom mode.

“Preset position” This keeps a list for preset positions. Clicking on the “Delete”

button will remove the current selected position from the preset list.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 99 100

No comments

Vivotek sd6122v User Manual Page 60