Vivotek SD7151 User Manual download pdf (Page 54)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

54 - User's Manual

Event Settings

In the Event column, click Add to open the event setting page. In this page, you can arrange the

three elements -- Trigger, Schedule and Action to plot an event. A total of three event settings

can be conﬁgured.

Event name: Enter a descriptive name for the event setting.

Enable this event: Select this option to enable this event setting.

Priority: Select the relative importance of this event (High, Normal, and Low). Events with higher priority

setting will be executed ﬁrst.

Detect next event after

seconds: Enter the duration in seconds to pause motion detection after a

motion is detected.

An event is an action initiated by user-deﬁned trigger source; it is the causal arrangement of the

following three elements: Trigger, Event Schedule, and Action.

Trigger: Also referred as the cause or stimulus, deﬁnes when to trigger the Network Camera. The trigger

source can be conﬁgured to use the Network Camera’s built-in motion detection mechanism or external

digital input devices.There are four choices of trigger sources:

■ Video motion detection

Select this option to allow the Network Camera to use the built-in motion detection mechanism as a

trigger source.

■ Periodically

Select this option to allow the Network Camera to trigger periodically for every other deﬁned minute. At

most 999 minutes can be set.

■ Digital input

Select one of the Digital inputs 1~4 to allow the Network Camera to use external digital input device

as a trigger source. Depending on your applications, there are choices of digital input devices on the

market which helps to sense any changes in temperature, vibration, sound and light, etc.

■ System boot

Select this option to allow the Network Camera to trigger when the power of Network Camera is

disconnected.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 98 99

No comments

Vivotek SD7151 User Manual Page 54