Vivotek SD8161 User Manual download pdf (Page 108)

VIVOTEK

108 - User's Manual

■ Passive mode

Most firewalls do not accept new connections initiated from external requests. If the FTP server

supports passive mode, select this option to enable passive mode FTP and allow data transmission to

pass through the rewall.

To verify if the FTP settings are correctly congured, click Test. The result will be shown in a pop-up

window as shown below. If successful, you will also receive a test.txt le on the FTP server.

Click Save server to enable the settings, then click Close to exit the Add server page.

Server type - HTTP

Select to send the media les to an HTTP server when a trigger is activated.

■ Server name: Enter a name for the server setting.

■ URL: Enter the URL of the HTTP server.

■ User name: Enter the user name if necessary.

■ Password: Enter the password if necessary.

To verify if the HTTP settings are correctly congured, click Test. The result will be shown in a pop-up

window as below. If successful, you will receive a test.txt le on the HTTP server.

Click Save server to enable the settings and click Close to exit the Add server page.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 219 220

No comments

Vivotek SD8161 User Manual Page 108