Vivotek TC5633 Installation Guide download pdf (Page 8)

- 7 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

The following table lists the LED patterns in general:

Condition LED color

Loading system after power on Steady red

During booting procedure Steady blue and red

After network is setup (system up) Blink green every second

During the upgrade firmware process Fast blink red

Enable audio Slowly blink green

To install in Ethernet

Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet

cable plug in the power adapter. If the LED turns out to be blink green, go to next

paragraph “Software installation”. If the Ethernet is not available, Network Camera will

switch to wireless LAN mode.

This Network Camera provides a general I/O terminal block with one digital input and one

digital output device control. The pin definition is as below.

1. Power

2. Digital output

3. Digital input

4. ground

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 90 91

No comments

Vivotek TC5633 Installation Guide Page 8