Vivotek VIVOTEK FD8162, Day/Night Fixed Dome Network Camera, Supreme Series with 2 Megapixel FullHD, IR-LED, User Manual download pdf (Page 70)

VIVOTEK

70 - User's Manual

Day/Night Settings

Switch to B/W in night mode

Select this checkbox to enable the Network Camera to automatically switch to Black & White display

during the night mode�

Disable IR LED (This option is not present on all models conguration screen!)

If you do not want to use the IR illuminators, you can select this option to turn it off�

IR cut lter

With a removable IR-cut lter, this Network Camera can automatically remove the lter to let Infrared light

pass into the sensor during low light conditions�

■ Auto mode

The Network Camera automatically removes the lter by judging the level of ambient light.

■ Day mode

In day mode, the Network Camera switches on the IR cut lter at all times to block infrared light from

reaching the sensor so that the colors will not be distorted�

■ Night mode

In night mode, the Network Camera switches off the IR cut lter at all times for the sensor to accept

infrared light, thus helping to improve low light sensitivity�

■ Synchronize with digital input

The Network Camera automatically removes the IR cut lter when DI triggers.

■ Schedule mode

The Network Camera switches between day mode and night mode based on a specied schedule.

Enter the start and end time for day mode� Note that the time format is [hh:mm] and is expressed in

24-hour clock time� By default, the start and end time of day mode are set to 07:00 and 18:00�

Light sensor sensitivity

Select Low, Normal, or High sensitivity for the light sensor�

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 180 181

No comments

Vivotek VIVOTEK FD8162, Day/Night Fixed Dome Network Camera, Supreme Series with 2 Megapixel FullHD, IR-LED, User Manual Page 70