Vivotek VIVOTEK IP7361, Day/Night Network Camera with 2 Megapixel, IR LED and PoE for Outside Section Specifications Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
VIVOTEK
User's Manual - 75
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation.
There are two ways to enable the camera control function:
1. Mechanical: Connect the Network Camera to a PTZ driver or scanner via RS485 interface.
2. Digital: Control the e-PTZ operation. It allows users to quickly move the focus to a target
area for close-up viewing without moving the camera physicallyPlease refer to page 80 for
detailed instruction�
Mechanical PTZ Operation
If you select “Mechanical“, the RS485 Settings section will be displayed as shown below:
RS485 Settings
Disable: Select this option to disable this function�
PTZ camera: Select this option to enable PTZ operation.
To utilize this feature, please connect the Network Camera to a PTZ driver or scanner via RS485
interface rst. Then you can congure the PTZ driver and RS485 port with the following settings.
VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00, and Pelco D protocol.
If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom camera
(scanner). Please refer to the user’s manual of your PTZ scanner to determine the Camera ID, PTZ
driver, and Port settings� The Camera ID is necessary to control multiple cameras� If you click Save to
enable this function, the camera control panel will be displayed on the main page� Please refer to the
illustration on page 77�
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 169 170

Comments to this Manuals

No comments