Vivotek 4X-PT7135 Specifications download pdf (Page 37)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

User's Manual - 37

Maintenance

This page allows Administrator to restore the Network Video Recorder to factory default, format

hard disk, and upgrade rmware version, etc.

System

Reboot: This feature allows you to turn off and then turn on the Network Video Recorder� It takes about

one ~ two minutes to complete the process� If the connection fails after rebooting, manually enter the IP

address of the Network Video Recorder in the address eld to resume the connection.

Restore Default Except Network Settings: This feature allows you to restore the Network Video Recorder

to factory default but retain the Network Settings (WAN / LAN / Host name settings)�

Restore Factory Default: This feature allows you to restore the Network Video Recorder to factory default�

Please note that the linked devices will be removed from the Device setting page, and all settings will be

erased� But the recorded data will remain on the History page�

The following message is displayed during the rebooting and restoring process�

Hard Disks

This column shows the information of your hard disk. For the rst time you install the hard disk, please

format it before recording� In addition, if you want to delete all recorded data, you can click Format Disk

to clean the hard disk� The following message is displayed during the formating process�

Firmware

This feature allows you to upgrade the firmware on your Network Video Recorder� Download a new

rmware le from VIVOTEK website. The le is in .upt le format.

It takes about five minutes to complete the process� Note that do not power off the Network Video

Recorder during the upgrade� The Network Video Recorder starts to upgrade and will reboot

automatically when the upgrade completes�

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

No comments

Vivotek 4X-PT7135 Specifications Page 37