Vivotek IP7142 User Manual download pdf (Page 48)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

48 - User's Manual

Preset Position

Click Preset Position to open the Preset Position page. In this page, you can set the preset

position for the Network Camera. A total of 20 preset positions can be conﬁgured.

Follow the steps below to set preset positions:

1. Adjust the Network Camera to a desired position with the buttons on the right side of the window.

2. In the Preset position name text box, enter a descriptive name for the preset position. The preset

position name allows up to forty characters. Click Add to take effect. The preset position name will

appear in the Preset Positions drop-down list. To remove a preset position from the list, select a preset

position name from the Preset Positions drop-down list and then click Delete.

3. You can click “Go to” to aim at preset positions, which will also displayed in the main page.

4. Click Save to take effect.

Custom Command

If the Custom camera (scanner) is selected as the PTZ driver, the PTZ control panel on

the main page will not take effect. You need to conﬁgure command buttons to control the

PTZ scanner. Click Custom Command to open the Custom Command page. A total of

ﬁve command buttons can be conﬁgured. Please refer to the user's manual of your PTZ

scanner to enter the command in the following blanks.

Click Save to enable the settings and click Close to quit the page.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 94 95

No comments

Vivotek IP7142 User Manual Page 48