Vivotek ND8401 Installation Guide download pdf (Page 7)

EN - 6

Connect network cameras to the NVR’s LAN ports.

2. If you want to access NVR over the Internet, connect the NVR to the Internet via the

WAN port. A web console can be established from a remote PC by keying http://<public

IP>:3454 in a browser’s URL address eld. However, port forwarding on the router for

the TCP port will be necessary.

3. Flip the power switch (at the rear of chassis) to the ON position, and push the power but-

ton to run the NVR.

Router

Internet

Router

Network Deployment

Default Fixed IP:

192.168.1.10

LAN

WAN

Switch

Router / Wireless AP

Clients

The LAN and WAN ports can be congured into the same or different subnets.

If you have cameras connected via the WAN port, make sure the WAN port

acquires an IP address from a DHCP server on router or AP. If not, the cameras

detected through the WAN port will use the default IPs, e.g., 169.254.xx.xx, and the

LiveClient software will not be able to detect their presence.

NOTE:

Default: DHCP

1 2 3 4 5 6 7 8 9 10 11

No comments

Vivotek ND8401 Installation Guide Page 7