Vivotek 65HP User Manual download pdf (Page 63)

VIVOTEK

User's Manual - 63

Network > General settings

This section explains how to congure a wired network connection for the Network Camera.

Network Type

LAN

Select this option when the Network Camera is deployed on a local area network (LAN) and is

intended to be accessed by local computers� The default setting for the Network Type is LAN� Please

rememer to click on the Save button when you complete the Network setting�

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned

by the DHCP server each time the camera is connected to the LAN�

Use fixed IP address: Select this option to manually assign a static IP address to the Network

Camera�

1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the

Network Camera on LAN� Please refer to Software Installation on page 13 for details�

2� Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP or network

administrator�

Subnet mask: This is used to determine if the destination is in the same subnet. The default value is

“255.255.255.0”.

Default router: This is the gateway used to forward frames to destinations in a different subnet. Invalid

router setting will disable the transmission to destinations across different subnets�

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 228 229

No comments

Vivotek 65HP User Manual Page 63