Vivotek FD8161 User Manual download pdf (Page 5)

VIVOTEK

User's Manual - 5

DI/DO Diagram

Please refer to the following illustration for the connection method�

Status LED

The LED indicates the status of the Network Camera�

Item LED status Description

Orange => All LED unlight => Orange => Red => Blinking Orange/

Red every 1 sec� continuously

Reboot/ Reset button for reset

2 Steady Red Power on; Network fails

3 Blink Orange and Red continuously Neteork works

4 Blink Green/ Orange/ Red rapidly Upgrading F/W

Blink Green/ Orange rapidly => All LED unlight => Orange => Red

=> Blink Orange/ Red every 1 sec.

Restore default

Hardware Reset

12V

+12V

Digital output

PIN 1

Power+12V

PIN 2

Digital input

PIN 3

Ground

PIN 4

The reset button is used to reset the system or

restore the factory default settings� Sometimes

resetting the system can return the camera to

normal operation� If the system problems remain

after reset, restore the factory settings and install

again�

Reset: Press and release the recessed reset

button with a paper clip or thin object� Wait for

the Network Camera to reboot�

Restore: Press and hold the recessed reset

button until the status LED rapidly blinks� Note

that all settings will be restored to factory default�

Upon successful restore, the status LED will

blink green and red during normal operation�

Recessed Reset Button

Status LED

SD/SDHC Card

Slot

SD/SDHC Card Capacity

This network camera is compliant with SD/

SDHC 16GB / 8GB and other preceding

standard SD cards�

1 2 3 4 5 6 7 8 9 10 ... 155 156

Comments to this Manuals

No comments

Vivotek FD8161 User Manual Page 5

Comments to this Manuals

Related products and manuals for Security cameras Vivotek FD8161