Vivotek FD8373-(E)HV User Manual download pdf (Page 9)

VIVOTEK

User's Manual - 9

Hardware Reset

The reset button is used to reset the system or restore the factory default settings� Sometimes

resetting the system can return the camera to normal operation� If the system problems remain

after reset, restore the factory settings and install again�

Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the

Network Camera to reboot�

Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that

all settings will be restored to factory default� Upon successful restore, the status LED will blink

green and red during normal operation�

Micro SD/SDHC Card Capacity

This network camera is compliant with Micro SD/SDHC 8/16/32/64GB and other preceding

standard SD cards�

Recessed Reset

Button

LED Denitions

Item LED status Description Priority

LED De`nitions

1 Steady Red Powered and system booting 3

Red LED off Power off

2 Steady Red Network failed 2

Red LED blinks every 1 sec�

(on for 1 sec� and off for

antoher)

Connected to network (heartbeat) and BRB

mode (Back Recovery Booting)

3 Blinks RED every 0�15 sec�

(on for 0�15 sec� and off for

another)

Upgrading rmware. 1

4 Blinks RED every 0�15 sec�

(on for 0�15 sec� and off for

another)

Restoring defaults� 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 229 230

No comments

Vivotek FD8373-(E)HV User Manual Page 9