Vivotek IP8151 Specifications download pdf (Page 171)

VIVOTEK

User's Manual - 171

http://<servername>/<network_rtsp_s<0~m-1>_accessname>

“m” is the stream number.

“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the

“su/jointfilesconvert/255000/bgroup of network: rtsp” for setting the accessname of SDP.

You can get the SDP by HTTP GET.

When using scalable multicast, Get SDP file which contains the multicast information via HTTP.

6.19 Open the Network Stream

Note: This request requires Viewer access privileges.

Syntax:

For HTTP push server (MJPEG):

http://<servername>/<network_http_s<0~m-1>_accessname>

For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.

rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>

“m” is the stream number.

For details on streaming protocol, please refer to the “control signaling” and “data format” documents.

6.20 Senddata (capability.nuart > 0)

Note: This request requires Viewer privileges.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/viewer/senddata.cgi?

[com=<value>][&data=<value>][&flush=<value>] [&wait=<value>] [&read=<value>]

PARAMETER VALUE DESCRIPTION

com 1 ~ <max. com port

number>

The target COM/RS485 port number.

data <hex decimal data>[,<hex

decimal data>]

The <hex decimal data> is a series of digits from 0 ~ 9, A ~ F.

Each comma separates the commands by 200 milliseconds.

flush yes,no yes: Receive data buffer of the COM port will be cleared before

read.

no: Do not clear the receive data buffer.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 180 181

No comments

Vivotek IP8151 Specifications Page 171