Vivotek IP8362 Specifications download pdf (Page 6)

VIVOTEK

6 - User's Manual

Installation

Hardware Installation

1. Attach the alignment sticker to the wall. Drill three holes into the wall. Then hammer the

supplied plastic anchors into the holes and secure the plate with supplied screws.

2. Feed the cables through the front opening of the wall mount bracket. (If you want to use

external devices such as sensors and alarms, please refer to the assembling steps on the

next page.)

3. Hang the wall mount bracket on the plate.

4. Fix the Network Camera on the wall mount bracket with two screws on both sides.

5. Secure the wall mount bracket with the supplied screws.

6. Adjust the angle of the wall mount bracket to aim at the shooting area.

The supplied L-type hex key wrenches

are exclusively designed to match each

screw. In case you will need to adjust the

lens later, do not discard the wrenches.

1 2 3 4 5 6 7 8 9 10 11 ... 49 50

No comments

Vivotek IP8362 Specifications Page 6