Vivotek PZ7112 Specifications download pdf (Page 43)

VIVOTEK

User's Manual - 43

Wireless LAN (PZ7112/PZ7122 only)

SSID (Service Set Identifier): This is the name that identifies a wireless network� Access Points and

wireless clients attempting to connect to a specic WLAN (Wireless Local Area Network) must use the

same SSID� The default setting is “default”� Note: The maximum length for an SSID is 32 single-byte

characters and cannot consist of “, <, >, or blank spaces�

Wireless mode: Click on the pull-down menu to select from the following options:

■

Infrastructure: Connect the Network Camera to the WLAN via an Access Point� (default setting)

■

Ad-Hoc: Connect the Network Camera directly to a host equipped with a wireless adapter in a peer-to-

peer environment�

Channel: While in infrastructure mode, the channel is selected automatically to match the channel setting

of the selected Access Point� In Ad-Hoc mode, the channel must be manually set to the same channel for

each wireless adapter� The default channel setting depends on the installed region�

TX rate: This eld is for selecting the maximum transmission rate over the network. The default setting is

“auto”, that is, the Network Camera will try to connect to other wireless devices with highest transmission

rate�

Security: Select the data encrypt method� There are four types, including: none, WEP, WPA-PSK, and

WPA2-PSK�

1�

None: No data encryption�

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 125 126

No comments

Vivotek PZ7112 Specifications Page 43